Serene Nexus SNC40Q/1 karta światłowodowa 40G, zatoka QSFP+
Opis
Światłowodowa karta sieciowa Serene Nexus SNC40Q/1 PCI-Express 3.0 x8, 40G ethernet , zatoka QSFP+ (chipset Intel XL710-AM1)
Opis
Serene Nexus SNC40Q/1 to zarządzalna karta sieciowa pracująca w standardzie 40GB Ethernet. Wyposażona została w szynę PCI-Express 3.0 x8. Urządzenie wyposażone jest w zatokę QSFP+.
Zasięg transmisji danych oraz rodzaj obsługiwanego światłowodu definiowany jest przez użyty moduł QSFP+ lub kabel QSFP+-4xSFP+ (w skład zestawu nie wchodzi transceiver QSFP+ ani kabel).
Oprócz karty i płyty ze sterownikami, opakowanie zawiera dodatkowe mocowanie (tzw. śledź, ang: bracket) o rozmiarze low-profile.
Karta używa oryginalnych sterowników Intel i jest zgodna z kartą Intel x710-QDA1.
Cechy produktu
-
Support for jumbo frame up to 9.5KB
Flow control support
Priority Flow Control (draft IEEE 802.1Qbb)
Enhanced Transmission Selection (draft IEEE802.1az)
Statistics management and RMON
802.1q VLAN support
DCB/DCB-X support
Message Signal interrupts (MSI-X)
Storage - Enabling competitive performance with native OS intelligent offload solutions, including NAS, iSCSI and FcoE
Host Interface:
PCI Express X8 lanes
Support PCI Express Base Specification 3.0 (8GT/sec)
LAN and Virtualization Features:
Network Virtualization offloads for VXLAN and NVGRE
Unified Networking Providing a single wire for LAN and storage: NAS (SMB, NFS) and SAN (iSCSI,FCoE)
Virtual Bridging Support – VEPA/802.1Qbg, BPE/802.1Qbh
Physical Functions – Up to 8 per port, up to 16 per device
Support for 128 Virtual Device Queues (VMDq) per port
Hardware Queue Pairs – Up to 1.5K (non-RDMA); up to 256K (RDMA)
Virtualization - Alleviating hypervisor I/O bottlenecks by providing flow separation for Virtual Machines (VMs)
TCP/IP/L2 features:
Receive Side Scaling (RSS)
Large Send Offload (LSO)
TCP/UDP/IP/SCTP Checksum Offload
IPV4, IPV6
|
QSFP+ 40Gigabit Ethernet Technical Specifications Adapter: |
||
| QSFP+ (Quad Small Formfactor Pluggable) supports: | XLPPI interfaces supports 40GBase-R PCS and 40 Gigabit PMA in order to connect with QSFP+ to 40GBase-SR4 / 40GBase-LR4 / 40G Direct Attach Cable | |
|
IEEE Standard /Network topology: with 40GBase-SR4 QSFP+ |
Fiber 40Gigabit Ethernet, 40GBASE-SR4 (850nm LAN PHY). | |
|
IEEE Standard /Network topology: with 40GBase-LR4 QSFP+ |
Fiber 40Gigabit Ethernet, 40GBASE-LR4 (1310nm LAN PHY) | |
| Operating Systems Support | ||
| Operating system support: |
Windows Linux |
|
|
General Technical Specifications |
||
| Interface Standard: | PCI-Express Base Specification Revision 3.0 (8 GT/sec) | |
| Board Size: |
165mm X 69mm(6.496 X 2.717) PCB thickness is 0.062 inch |
|
| PCI Express Card Type: | X8 Lane | |
| PCI Express Voltage | +12V +- 8% | |
| PCI Connector: | X8 Lane | |
| Controller: | Intel XL710AM1 | |
| Holder: | Metal Bracket | |
| Weight: | 130gr (4.568 oz) | |
| Power Consumption | 3.600W | |
| Operating Humidity: | 0%–90%, non-condensing | |
| Operating Temperature: | 0°C – 45°C (32°F – 113°F) | |
| Storage: | -40°C–65°C (-40°F–149°F) | |
| EMC Certifications: |
FCC PART 15B EN 55022: 2010 EN 55024: 2010 EN 61000-3-2:2014 EN 61000-3-3:2013 |
|
| LEDs: |
Link 10G:Green Link 40G: Yellow Act: Blue;Blink on Activity |
|
| Connectors: | (1) QSFP+ cage: MOLEX, P/N 75586-0010, or compatible. | |
Wsparcie dla następujących systemów operacyjnych (NOS).
- Windows 7 32-bit(64-bit)
- Windows 8 32-bit(64-bit)
- Windows 8.1 32-bit(64-bit)
- Windows Vista 32-bit(64-bit)
- Windows Server 2003 32-bit(64-bit)
- Windows Server 2008 32-bit(64-bit)
- Windows Server 2008 R2 32-bit(64-bit)
- Windows Server 2012 32-bit(64-bit)
- Windows Server 2012 R2 32-bit(64-bit)
- Linux kernel 2.6.30 or greater (x86_64) (w/ SR-IOV support)
- FreeBSD 7.2 lub późniejszy
- Linux RHEL 5.6
- Linux RHEL 6.x
- Linux SLES 11 SP1
- Linux SLES 10 SP4
- OS Independent
- DOS NDIS 2
- DOS ODI
- EFI 1.1
- UEFI 2.1
- Vmware ESX 4.0
- VMware Workstation